martes, 24 de mayo de 2011

Aquasana Whole House Water Filter System Rhino EQ-300 3yr 300000 gallon

Aquasana Whole House Water Filter System Rhino EQ-300 3yr 300,000 gallon Reviews

Aquasana Whole House Water Filter System Rhino EQ-300 3yr 300,000 gallon

Gives you chemical-free, odor-free, great tasting water at every tap, tub and shower in your home
Get softer, smoother skin and shiny, healthy hair from chlorine-free showers and baths
Your clothes will last longer when washed in chlorine-free water.
Filters chlorine, rotten egg smell, iron (<1 PPM) and 100s of chemicals the EPA has found in our water supply
UL  certified to ANSI/NSF Standard 42 for 300,000 gallons

Aquasana Whole House Water Filter System Rhino EQ-300 3yr 300,000 gallon Features

Low cost pre-filter sediment cartridges you can replace often (every 1-3 months) extend the life of the main filter
See-through pre-filter housing lets you easily tell when it's time to replace the cartridge
UL Certified to ANSI/NSF Standard 42 for 300,000 gallons...that's about three years for the average family
Unique design prevents clogging and eliminates need for regular back-flushing or other tedious maintenance
Rated at 7 gallons per minute to avoid water pressure loss in your home
Space-saving design stacks the chambers to save floor space
Includes installation kit, shut-off valve, and all required hardware
Full one year year warranty on materials and workmanship from Sun Water Systems™, a strong company with over 15 years experience in the water treatment industry, 17 patents, and over 7 million products sold
The Aquasana EQ-300 has a 10 year track record with satisfied customers
Full 90 day, 100% Satisfaction Guarantee

Rhino EQ-300 Flow is Rated at 7 GPM

The EQ-300 Rhino filter is rated at 7 gallons per minute. This flow rate is adequate for homes with up to three bathrooms.

If you home has more than 3 bathrooms, two EQ-300 filters can be installed in a manifold configuration (PDF, 68KB) for a higher flow rate.

The Aquasana EQ-300 whole house filter is a great value, even when two are installed for your larger home.
EQ-300 Rhino Filter for Iron & Manganese

The Aquasana EQ-300 filter can remove iron and manganese, provided the levels are less than 1 PPM.

With higher levels of iron and/or manganese, the Aquasana EQ-300IP™ Iron and Sulfur pre filter is recommended.

EQ-300 Rhino Filter for Sulfur (Rotten Egg Smell)

The Rhino EQ-300 filter can also eliminate sulfur or rotten egg smell from your hot water.

If your water has a sulfur/rotten egg smell in the hot and cold water, the Aquasana EQ-300IP Iron and Sulfur pre filter is recommended.

Aquasana EQ-300 Filter Includes 3 Stages

-The Aquasana EQ-300 Rhino home water filter provides 3-stage filtration for all the water in your home:
-Aquasana EQ-300 3-Stage Whole House Filter Illustration
-Rhino EQ-300 3 Stage Filter

1: Mechanically filters sediment as small as 5 microns. This stage removes sediment to extend the life of the main filter. The sediment filter cartridge is low cost, easily monitored via the clear filter housing, and simple to replace yourself (no plumber needed).

2: Uses KDF-55 ® to transform chlorine to harmless chlorides. This stage also reduces surface tension and hardness of the water for great feeling baths and showers. The water flows upward in this stage to insure exposure to all sides of the KDF granules.

3: Includes high-grade 12/40 mesh activated carbon to enhance water quality, clarity and taste. Activated carbon is recognized by the U.S. Environmental Protection Agency as the "Best available technology for the reduction of synthetic chemicals." The water flows downward through this stage to compress the carbon and provide better contact between the carbon and water.

Some whole house filters include multiple stages of filtration in a single, standard size (10" or 20") cartridge. In many cases, there is simply not enough filtration media to adequately filter the water flow at the peek rates used in a typical home.

Other filters include many stages in a larger design, however many of the "stages" are simply another "layer" of the same filtration media.

Always look for independent certifications of the entire system to prove performance claims.

Underwriters Laboratories  Certification

Rhino EQ-300 Whole House Water Filter is Certified by Underwriters Laboratories to ANSI/NSF standard 42 with class 1 performance for 300,000 gallons.

This means the EQ-300 filters chlorine, bad tastes, odors and sediment for 300,000 gallons.
The Rhino EQ-300 is Certified by Underwriters Laboratories.

In fact, chlorine levels in the filtered water were not detectable for the duration of the test. You can look at the performance data sheet below to verify that there was no increase in chlorine levels output by the EQ-300, even as the system reached 300,000 gallons filtered.

Given the design of the EQ-300, Volatile Organic Chemicals (VOCs) and Synthetic Organic Chemicals (SOCs) will also be greatly reduced.

Only chlorine removal is tested because that is the ANSI/NSF standard and the cost of testing for filtration of many chemicals for 300,000 gallons is prohibitively expensive.

The Underwriters Laboratories (UL) certification is the most difficult water filtration certification to attain.

Instead of just running a one-time test, UL subjects Aquasana to rigorous quality control and regular inspections to insure that the Rhino EQ-300 you buy today is as good as the one which was tested in their labs.

To avoid the expense of testing, many manufacturers claim "certified components" for their whole house water filters. This only means that the carbon, KDF and other components used in the system were individually certified.

"Certified components" on a non-standardized filtration system proves nothing about system design such as adequate amount of the filtration media, proper water flow through the media, proper sequencing of the stages, etc.

Watch out for this trick on low cost competitive whole house water filters. Don't buy an unproven imitation.

 

Rhino EQ-300 Whole House Filter Installation

The EQ-300 whole house filter must be installed by a plumber licensed by your state or local authority to validate your warranty.

Installation can typically be done in 1.5 to 2.5 hours. Additional time may be required depending on the location of your service line and other factors.

Important EQ-300 installation considerations:

Operating pressure range is 20psi to 100psi (1.4 bar to 6.0 bar)
Operating temperature range is 40°F - 100°F (4°C - 38°C)
Rated service flow is 7 gallons per minute (26.25 liters per minute)
Service life is 300,000 gallons (1,136,000 liters) or 3 years
The EQ-300 must be installed in an upright position (as shown in pictures)
The EQ-300 must be protected from direct sunlight exposure
Install on cold water lines only (i.e., before the hot water heater)
The EQ-300 is not intended for water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the filter

Aquasana whole house water filter

Components Included with Your Filter

EQ-300 main filter unit
Sediment pre-filter housing
One sediment pre-filter cartridge
Certificate of Warranty
Installation Instructions
Sediment pre-filter replacement instructions
Installation kit:
2 x 4" PVC Nipples
2 x 2" PVC Nipples
2 x PVC Unions
1 x Shut Off Valve
1 x Bypass Hose (for temporary use only)
1 x Garden Hose adapter (for initial flushing)

Easy Maintenance: Changing the Pre-Filter

The EQ-304 sediment pre-filter cartridge should be replaced every 1-3 months, depending on the condition of the water source.
The Sediment Pre-Filter extends life of the main filter and is easily inspected and replaced.

You can easily monitor the pre-filter via the see-through housing to determine if your water requires more frequent pre-filter cartridge changes.

To replace the EQ-304 sediment pre-filter cartridge:

Close the orange shut off valve
Relieve pressure in the water system by opening a faucet near the unit
Place a bucket under the sediment pre-filter housing
Press the pressure release button on top of the pre-filter housing to relieve any remaining water pressure
Unscrew the sediment pre-filter housing
Remove the old filter cartridge
Wash out the sediment pre-filter housing as needed to remove sediment
Clean the housing o-ring and lubricate it with petroleum jelly
Insert the new filter cartridge into the housing
Screw the sediment pre-filter housing back on
Slowly open the orange shut off valve and check for leaks
In case of leaks, tighten connections or clean and reseat the o-ring

Easy Maintenance: Changing the Main Filter

The EQ-300R main filter replacement can be installed without a licensed plumber.

The unions supplied in the installation kit make it easy to uncouple the EQ-300 main filter from the water supply line and insert the EQ-300R.

The replacement main filter must be flushed following the instructions supplied before installation.

Overall, it's a fairly easy job for a handy home owner, plus it only needs to be done every three years or 300,000 gallons.

Hitachi 10 sliding compound miter saw Best 5000 btu window air conditioner

 

5000 btu window air conditioner

Reduces moisture in the air, allowing you to feel more comfortable.
2cool settings and 2 fan-only speeds
Keep the cold air moving at the speed of your choice for custom comfort.
Antibacterial mesh filter
Helps keep air clean. Filter check lets you know when the filter needs to be replaced, and the tilt-out design allows the filter to be easily changed.
8-way air direction
Window-mount installation.

Some of the best brands in the air conditioning industry. Many of the elite air conditioners are designed to be energy efficient & eco friendly. Take note of the seasonal energy efficiency rating (SEER) when securing an air conditioner. The higher the EER, the more eco friendly is the unit.

When purchasing your air conditioner, find out the measurement of the area where you plan to install the unit so that you can determine the cooling capacity of the air conditioner that you will obtain.

Fluke Networks MT-8200-60A IntelliTone Works safely on active networks

fluke mt-8200-60a

 

Security and safety are important factors that baffle the development and practicality of active networks. However, most research on active networks focuses on security. Based on the analysis of safety requirements of active networks and possibility of using the safety kernel that is a new concept of safety assurance, this paper presents a safety assurance mechanism SKAN for active networks. We design it from several important aspects of safety policy, practice of SKAN, reuse and effect. SKAN can address common problems found in active networks, such as lack of the effective support of application variety and expressiveness of safety policy.

Sliding compound miter saw Hitachi C10FSH 10-Inch

Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser

The bevel ranges for 15-45 degrees as well. You can easily flip the blade without have to move your material from its place. Equipped with the Laser Marker System, the blade can ensure perfect alignment with any angle of your choosing.

The large table ensures that the machine can readily support itself. The built in clamping system will steadily hold your piece in place. The ergonomic handle offers a great grip preventing unintended cuts.

lunes, 23 de mayo de 2011

Buy 10' x 30" Intex Easy Set Pool Specifications & Features

Set Intex  10' x 30" Easy Set Pool

10′ x 30″ Easy Set Above Ground Swimming Pool Specifications & Features: Easy Set pools are very affordable, much easier to set up and disassemble than any rigid steel walled pool. An additional benefit of buying an Intex above ground pool is the knowledge that there is a staff of well trained, in-house consumer service agents ready to answer your …

10′ x 30″ Intex Easy Set Pool price is still on sale and price may up again, so buy 10′ x 30″ Intex Easy Set Pool now hit the Link  below to find the best offer now.  


Hook and Loop Electronic Polisher-Sander Variable speed (0-3,000 RPM)

Hook and Loop Electronic Polisher-Sander

 

Variable speed (0-3,000 RPM) with pre-set :

  • maximum speed dial; ideal for ultra slow polishing
  • Electronic speed control maintains constant speed under load
  • Fast and powerful polishing for clear coat finishes
  • Lock-on button for continuous use at one speed
  • One-year manufacturer’s warranty
  • Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details. 

     

    Cheap Makita 5402NA 16-5/16-Inch Circular Saw

    Additionally, I made a portable table saw table with roll-away base. The saw mounts underneath with toggle-clamps and plugs into a safety switch for power. The saw is heavy, so i reinforced the table underneath with a plywood grid —like a torsion-box— to prevent cabinet-drop. Now, the installation takes about twenty seconds. BAM! … instant table-saw!

    I took care to perfectly align the base-plate edges co-planer to the saw-blade and the blade is perfectly parallel to my home-made fence. ( Basically a heavy-duty T-square ) I only do 90-degree cuts with this monster, but with a 12″ Forrest woodworker-II blade, it cuts as cleanly as any cabinet saw I have ever used. Large Lap-joints, rabbets and dados are accurate, fast and easy.

    Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser Features Hitachi C10FSH

     

     

     Hitachi 10 sliding compound miter saw  It’s Feature Comprises saw, tct saw blade, 10-millimeter container wrench, dust bag.12 amp motor; 3,800 rpm; 10 unavoidable terminates for swift settings; pivoting barricade to support the work portiion.Excellent 10-inch sliding dual combination miter saw together with adjustable laser label, electronic speed operate, and soft start to sacrifice noise and recoil.Stainless steel detent plate; carbide blade.20-3/4 by 41-1/2 by 24-1/4 inches; 43 pounds; 5-year warranty.

    To save you even more time, bevel terminates to the particular and left are comfortably settled at zero and 45 degrees.Durably built, this tool is backed with an manufactures-leading five-year warranty. It is compatible with Hitachi’s UU610 Universal Work Station.Chock-Full of User-Friendly FeaturesThe C10FSH contains plentifulness of highlights to help you establish the complete sell out the initial time. To kick off, a splinter guard behind the wall expands safety and reduces tear-out for clean, complete reduces.

    sábado, 21 de mayo de 2011

    Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser

    Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser Reviews

     

    I recently purchased this video, and the guy I was impressed! The test tool for a large company of Orange Home Improvement! I tried DeWalt, Bosch, Makita, Hitachi and miter saws. This time, Hitachi is a cut above the rest! They are worth noting some improvements in C10FS. In particular, increased the left / thickness of aluminum around the law, the previous version has a problem with the cracking of the fence! The collection of dust (which is actually in the bag of powder) of this new range is almost double (if not more so) than C10FS.

    The dust collection is large and can accomidate a wide range of vacuum systems. It should be recalled, the assembly of the vacuum (which attributed the vacuum tube) is aluminum, not plastic as in the case of most of the mountains! Thinggy gum behind the blade does its job well. The fence of the coin is beautiful and strong, and easy to move off the road if it’s not! I did not come with the sleeve of dust lanes (as many have written in their comments here too)

    Hitachi 10 sliding compound miter saw

    The only problem is the position of the laser! It is true, and allows the operator to know exactly where the cutting blade, the fine adjustment knob to adjust the laser works well lasers, if necessary! However, I noticed that once you start cutting, blackpowder guide rubber (right behind the blade), gets in the way of the laser beam! This means that you can see the line before you start cutting, but once started, the line disappears behind the black rubber! I also noticed that you removed the bezel stops! The C10FS had 5 stops as bevel, now has only three (90, 45 left / right)!

    The mountain has incredible smoothness and a slide action of Nice. The decline has been significantly reduced, partly because of the poly-V Motorized Beld! Another aspect worthy of note, as C10fs Hitachi and others, right and left are almost independent of each other! This Hitachi has always been a wonder! Recalibrate This detail makes the fence easier, instead of the half moon piece of aluminum that normally binds both the left and right fences! I have heard cases where (Makita, DeWalt, Bosch and) fences have deformed due to the fact that I am a piece!Read More.... Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser

    Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser Features

    • Powerful 10-inch sliding dual compound miter saw with adjustable laser marker, electronic speed control, and soft start to reduce noise and recoil
    • 12 amp motor; 3,800 rpm; 10 positive stops for quick settings; pivoting fence to support the work piece
    • Stainless steel detent plate; carbide blade
    • Includes saw, TCT saw blade, 10-millimeter box wrench, dust bag
    • 20-3/4 by 41-1/2 by 24-1/4 inches; 43 pounds; 5-year warranty

    The electronic speed control ensures consistent RPM throughout the cut, so you get smooth, precise, controlled cuts each and every time.Additionally, the C10FSH utilizes a Poly-V-Belt transmission rather than a traditional gear transmission. This soft start technology allows the saw to operate smoothly and quietly and reduces recoils during startup. Full Reviews On Amazon

    There is no better miter saw out there, period. I have owned all of them, and this is by far the best. Mine is almost 2 years old and is still perfect, as it was right out of the box. I bought a Forrest chop master blade for it that cuts without chipping, and I think this combination is the best possible. The laser is just for lining up your cut, once you begin you should not move your part so no need to see the line. If you have it adjusted correctly it will cut where the line was. I find that I can split a pencil line or cut to either edge of the pencil line if I want to simply by lining it up first. It is really great when cutting an angle that is undetermined, just mark it and line it up with the laser line, then cut. If you need the line on the other side of the blade just make a cut in a piece of scrap while holding it still and adjust the laser line to the cut.

    After almost 2 years of constant use, this saw is still right on the money. I will buy it again if I need another.

    Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser Overviews

    It came down to either the Hitachi c10fsh parts or the Hitachi c10fsh 10. All my cordless tools are Makita. I love them and was ready to go with LS1013 but it didn't have a Laser Guide. Even the boys on "Ask This Old House" were salivating over this new technology. After putting the saw through it's paces last night, I am very impressed with the saw.I agree with just about everything said below. Peter Jung's review comparing this saw to Makita's LS1013 are mostly accurate but I'm sure he would agree those minor (some extremely minor) differences are very much outweighed by the laser guide feature of the Hitachi. Why Makita hasn't come out with a Laser option on their saws is a mystery to me.Soo Amazon Heave a great offer for this product... Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser